Aqua Master Tools | pH measuring device | P50 Pro

Beschreibung

pH measuring device P50 Pro from Aqua Master Tools-Cheap PH measuring device

You want to carry out precise measurements of pH and temperature values ​​ in liquid nutrients, swimming pools, aquariums or ponds? Then the pH measuring device P50 Pro from Aqua master tools is the perfect choice for you. It is one of the newer models in the wide range of high -quality analysis products from Aqua Master Tools. With a key turn, you simply switch between the different parameters. The measuring device is pre -calibrated and with batteries and is immediately ready for use.

application of the pH measuring device P50 Pro

1. 1. Before you use the pH measuring device for the first time, you should soak it in tap water for 12 hours.
   2. Remove the protective cap.
   3. clean the pH electrode carefully with distilled water and then dry it.
   4. press the on/off switch to switch on the measuring device.
   5. Keep the pH probe vertically in the watering solution and let it circle easily. Wait a few seconds for the values ​​to be displayed on the display and no longer fluctuate.
   6. With the C/F key you can switch between Celsius and Fahrenheit units.
   7. rinse the electrode with water after use and press the on/off switch to switch off the measuring device.

It is recommended to maintain the pH measuring device and with KCL solution in the protective cap.

When should you calibrate your pH measuring device?

To ensure that the measured values ​​are precise, it is important to calibrate a pH measuring device regularly . It is usually recommended to calibrate the pH measuring device before each use and at least once pro month.

When calibration of the measuring device, the pH probe is kept in calibration solution in order to check and re-adjust the accuracy of the measuring device. The buffer solutions usually have pH values ​​of PH 4 and Ph 7 .

When should you clean your pH measuring device?

To ensure that your pH measuring device delivers precisely measured values, it is important to carry out regular cleaning. It is recommended to clean the measuring device after each use and at least once a week .

How should you clean your pH measuring device?

There are several steps that must be observed when cleaning a pH measuring device:

1. 1. 1. first remove the electrodes of the measuring device from the solution and rinse them thoroughly with water.
      2. then solve some cleaning agent , in water and immerse the electrodes in it. Let them soak with the instructions of the cleaning agent to remove contamination.
      3. then thoroughly rinse the electrodes with water to remove all cleaning agents.
      4. dry the electrodes before using them again.
      5. also clean the housing of the measuring device with a damp cloth and then dry it thoroughly from

It is important to make sure that the electrodes are not damaged and that no impurities remain on the pH probe, as this can affect the accuracy.

Technical data on the PIE PRO

Pro

measuring range

• Ph: 0.0 ~ 14.0 PH
• Temp.: 0 ° C ~ 50 ° C (32 ° f ~ 122 ° f)

resolution

• Ph: ± 0.1 ph
• Temp.: 0.1 ºC (1.0 ºF)

measurement accuracy

• Ph: ± 0.1 ph
• Temperature: ± 0.5 ° C (32 ° f)

further data

• Temperature equalization: 0 ° C – 50 ° C (32 ° F – 122 ° f)
• Calibration: Ph: 2 Point Auto 4.0 – 7.0 PH
• Properties: Battery Advertisement & AMP; Autom. Temperature equalization
• energy supply: 3 × 1.5 volt AG-13 button cell (including)
• automatic switch -off: 8 minutes
• Calibration display: If the calibration is correct
• waterproof: IP67
• Dimensions: 220 x 40 x 40 mm
• Weight: 102 grams

are included in the scope of delivery

• 1 x pH measuring device P50 Pro
• 1 x user manual (NL – EN – DE)
• 3 × 1.5 volt AG-13 button cell